Show and Tell

Luthier's Cooperative, Littleton, MA

Ken Malsky, Paul Norman and Yukon have graciously agreed to host a NEL "show and tell" in their beautiful new space in the Littleton Mill. The idea behind this meeting is to have people bring something interesting - an instrument, a tool, jig, etc - that others might enjoy seeing and hearing about. Members always comment on how much they enjoy seeing people's work (including work in progress) so here is a chance to spend more than a few minutes at the end of the meeting seeing what others have been up to.

Directions: The Mill is located at 410 Great Rd, Littleton MA. This is an old factory building near Littleton Common (across from Hewlett Packard) at the intersection of Rt 119 (Great Road) and Rt 110/2A (King St) and very close to Rt 495. This is about 40 minutes northwest of Boston and fairly close to southern NH.

Easiest thing to do is get on Rt 495. From I-90 or Rt 2, you will be heading north. From Rt 3 or Rt 93, you will be heading south. Take Rt 495 to exit 31 (Rt 119 Littleton/Groton). From the south, you will come off the exit, turn left and take an immediate right into the lower parking lot. If you miss the turn, the next right will also take you there.

From the north, you will come off the exit and bear right towards Littleton Common. After you pass Littleton Lumber on your right, you should then take the next right hand turn into the parking lot. Again, if you miss it you can take the following right into the same lot. If you pass the Mobil Station on your left, or the traffic light in the center of town - you have gone too far. This is actually easier than I am making it sound.

From the lower parking lot, walk out to Rt 119 and head towards the traffic light. There is a large sign listing all the businesses in the building. Enter the building via the red door and follow signs for the meeting.